Are These Cams OK? (pics), also Question on Connector Wiring

[prophecymiller]

Ok, I bought these cams a while back locally- they are HKS 264/272...I have noticed that the bearing surfaces are scuffed up and scratched...is there a way to get oversized bearings to make up for the worn off metal??? Are these usable still?
http://img408.imageshack.us/img408/3435/dscf0191sn6.jpg http://img241.imageshack.us/img241/6276/dscf0197aw7.jpg

Also, I need to wire up a gm3bar map sensor and have never worked with these connectors before...I tried to find something that shows the correct way to apply the ends to the wires but came up with nothing...there are a few different tabs and such on these ends- any help would be appreciated:)

http://img515.imageshack.us/img515/8199/dscf0199cn2.jpg

Steven

[jonvr4]

try the penny test. Rub a penny against the cam surface, if copper is left behind, you may want to have them micropolished.

[D Walker]

We have all the proper tools to work with the Weatherpack connectors and pins.

You can have the cam bearings milled oversized and machined to take bearing, but honestly its usually cheaper to just find a new head or cams.

[Shane]

the cams appear to be fine from the pics