Pivvay
June 20th, 2006, 07:17 AM
I'm getting out of the game. Those who have been around know a bunch of what I've got. Those who don't here's some of it, most is new. If you've been waiting to get something I bought at less than retail, here's your chance.
2 NIB (not reman) 100mm cranks w/ bearings
FRH ported head with Ferrea valves
Magnus Dogmission
GT-42
1993 Galant headlights
JDM Galant 2 bulb corner lights
Galant carbon fiber hood (vented) and trunk
Sparco EVO Seats
3" Sparco Harnesses (date expired for scca)
Sparco Steering wheel
Tekniq Steering wheel quick release (bolt on)
3Speed Black shift knob
3Speed scattershield
1991 GVR4 Shell or part out
1989 Colt GT (original turbo) Complete
Direct port nitrous with hard lines bent already (NX kit)
Magnus Intake Mani
Custom Water Injection Kit (Shurflo 150psi and Aquamist nozzles)
Crazy new in box engine parts (Magnus/ross pistons, GRP rods, A1 head studs and more)
Crank scraper
Supra Fuel pump
Earls -6 AN Fuel line, filter, fittings and black powdercoated fuel rail
Eprom ECUs
NIB Wideband w/ 2 sensors
52mm Black Greddy Gauges (boost, egt, fuel press, oil press, water temp, oil temp)
GVR4 Yakima Roof Rack
Rare 1.6L Colt GT Head ready to bolt on
Custom Galant VR4 water to air intercooler water tank (passenger side fenderwell)
OEM Forward facing oil filter housing
GVR4 suspension pod (goes on dash to put gauges or similar in)
GVR4 roll cage main hoop (chromo)
Apexi Turbo timer
Full set prothane motor mounts installed (black w/ chopped DS mount)
O2 Sensor guage (blue)
SAFC 1 (blue screen)
Colt GT AutoX suspension (GC, Koni, RRE Camber plates)
Tons of 2.5,3,4,and 5" aluminum and stainless straight tubing and bends (90s only)
2g mani
3" High flow cat (new)
GVR4 fog lights
GVR4 Gauge cluster (101k)
Black powdercoated valve cover
Carbon fiber spark plug cover
Misc Earls -6an line and fittings
Good 14b exhaust housing (i think it's good)
Engine blocks and tranny cores
23 spline t-case
Suzuki Hyabusa Individual Throttle bodies
Chromo roll cage stuff (60-80 feet?)
Manual steering rack
New Black Tial BOV
Magnacore Spark Plug Wires
91 and 90 Throttle bodies
~10 FIAV/ISC blockoff plates
GVR4 Dash plaque (371/1000)
1g shifter
Metal shifter bushings
ABS Delete prop valve AND lines
New Aeromotive -10an Fuel Filter
All manner of stock parts and probably other go fast parts I'm forgetting. I'll try to get a more complete list as I start to go through it and add prices as I can.
If you're interested in anything email chris@shiftedthinking.com for info or pictures. Please no "why are you getting out emails". I don't check this board often so email is best if you want to buy anything. I'm not fire-saleing this stuff but am happy to talk with people who are seriously interested and arrange payment and delivery in a way that's convienent. Anything that requires additional welding/cutting work like installing the BOV or putting together the rest of a custom air to water intercooler can be worked out a discounted rate (TIG welding only). If I don't reply you lowballed too much. Feel free to pass the list and email to anyone.
Thanks,
Chris
2 NIB (not reman) 100mm cranks w/ bearings
FRH ported head with Ferrea valves
Magnus Dogmission
GT-42
1993 Galant headlights
JDM Galant 2 bulb corner lights
Galant carbon fiber hood (vented) and trunk
Sparco EVO Seats
3" Sparco Harnesses (date expired for scca)
Sparco Steering wheel
Tekniq Steering wheel quick release (bolt on)
3Speed Black shift knob
3Speed scattershield
1991 GVR4 Shell or part out
1989 Colt GT (original turbo) Complete
Direct port nitrous with hard lines bent already (NX kit)
Magnus Intake Mani
Custom Water Injection Kit (Shurflo 150psi and Aquamist nozzles)
Crazy new in box engine parts (Magnus/ross pistons, GRP rods, A1 head studs and more)
Crank scraper
Supra Fuel pump
Earls -6 AN Fuel line, filter, fittings and black powdercoated fuel rail
Eprom ECUs
NIB Wideband w/ 2 sensors
52mm Black Greddy Gauges (boost, egt, fuel press, oil press, water temp, oil temp)
GVR4 Yakima Roof Rack
Rare 1.6L Colt GT Head ready to bolt on
Custom Galant VR4 water to air intercooler water tank (passenger side fenderwell)
OEM Forward facing oil filter housing
GVR4 suspension pod (goes on dash to put gauges or similar in)
GVR4 roll cage main hoop (chromo)
Apexi Turbo timer
Full set prothane motor mounts installed (black w/ chopped DS mount)
O2 Sensor guage (blue)
SAFC 1 (blue screen)
Colt GT AutoX suspension (GC, Koni, RRE Camber plates)
Tons of 2.5,3,4,and 5" aluminum and stainless straight tubing and bends (90s only)
2g mani
3" High flow cat (new)
GVR4 fog lights
GVR4 Gauge cluster (101k)
Black powdercoated valve cover
Carbon fiber spark plug cover
Misc Earls -6an line and fittings
Good 14b exhaust housing (i think it's good)
Engine blocks and tranny cores
23 spline t-case
Suzuki Hyabusa Individual Throttle bodies
Chromo roll cage stuff (60-80 feet?)
Manual steering rack
New Black Tial BOV
Magnacore Spark Plug Wires
91 and 90 Throttle bodies
~10 FIAV/ISC blockoff plates
GVR4 Dash plaque (371/1000)
1g shifter
Metal shifter bushings
ABS Delete prop valve AND lines
New Aeromotive -10an Fuel Filter
All manner of stock parts and probably other go fast parts I'm forgetting. I'll try to get a more complete list as I start to go through it and add prices as I can.
If you're interested in anything email chris@shiftedthinking.com for info or pictures. Please no "why are you getting out emails". I don't check this board often so email is best if you want to buy anything. I'm not fire-saleing this stuff but am happy to talk with people who are seriously interested and arrange payment and delivery in a way that's convienent. Anything that requires additional welding/cutting work like installing the BOV or putting together the rest of a custom air to water intercooler can be worked out a discounted rate (TIG welding only). If I don't reply you lowballed too much. Feel free to pass the list and email to anyone.
Thanks,
Chris