2g SAFC-II Install - help

[krothe]

Has anyone installed an SAFC-II on a 95 Talon TSI recently? A VFAQ for a 99 eclipse doesn't seem match the wiring on my 95. A pic of a successful wiring setup on plugs 26p and 22p would be great.

Kirk
95 Talon TSI
98 Talon TSI

[confusionisbad]

I'm pretty sure the ecu pinout for all 95-99 cars are the same. With that being said just follow this guide:

http://diy.prostreetonline.com/howto/showarticle.asp?articleid=25


Here is a link to show what pins are what on the plugs:

http://vfaq.com/mods/ecu-harness-2G.html

Its really not that hard, just make sure all wires have a good connection with eachother.

[krothe]

Thanks for the info. I've been referencing these two links, but still can't figure it out.

The first link is the VFAQ for a 99 Eclipse, which I agree should be the same setup for my 95. The problem is that when I remove the plugs from the ECU, and turn the ignition to the on position, there is no voltage between pin 26 (ground) and pin 25 which is supposed to be at +12. I can only find 12V on pin 20 and pin 7. The wire coloring is also different than the 99 confusing things further.

Its interesting that I get a page not found error trying to access the link for the 2g SAFC-II setup on vfaq.com. I think I'm going to need a pic to get this straight.

kirk