PDA

View Full Version : T&T yesterday

DemonStreetMachine
July 20th, 2006, 04:38 PM
Went to the track yesterday. Ended up bettering my times on the b16g. It was hot yesterday so I was in the thirteens until the last two runs of the night. Final run I ran a 12.76 @ 107.2 with a 1.72 60'.

I might try a second chip with a more race gas aggressive tune to see if I can get on the other end of the twelves.

Nick J
Wazzelby
July 21st, 2006, 08:39 AM
Great job!! I still have yet to make it to the track since the rebuild. I just can't seem to keep the intercooler pipes on the car!!
BlueVelocity
July 21st, 2006, 10:37 AM
Way to go Nick!!

Erron S.
sbiggi
July 21st, 2006, 10:45 AM
Great job!! I still have yet to make it to the track since the rebuild. I just can't seem to keep the intercooler pipes on the car!!

Get some 3m Headliner Spray Glue, and some adhesive remover for when you need to remove them.
ErikW
July 21st, 2006, 11:14 AM
Nice Nick!!! ...with a 16g non-the-less...

Sorry Seth. But I have to say that is getto, buddy. I would have to say. ..."You might as well get it done right the first time." kinda thing with this deal.
He has crappy couplers and the piping is larger than what he wanted, so he's gotta just get it replaced. Or at the least get new couplers now that the ends are flared.


Get some 3m Headliner Spray Glue, and some adhesive remover for when you need to remove them.
sbiggi
July 21st, 2006, 11:24 AM
Nice Nick!!! ...with a 16g non-the-less...

Sorry Seth. But I have to say that is getto, buddy. I would have to say. ..."You might as well get it done right the first time." kinda thing with this deal.
He has crappy couplers and the piping is larger than what he wanted, so he's gotta just get it replaced. Or at the least get new couplers now that the ends are flared.

It is ghetto, but it works.

I have one coupler that wouldnt stay on because of the angle of the pipe.
Used that glue and it hasnt been an issue since, even at 32 psi (the couple times I was messing with the bc)

If you are gonna replace all the stuff anyways, might as well make it work for now and stop blowing your pipes across the highway.
Hemicolt
July 21st, 2006, 11:45 AM
Get some 3m Headliner Spray Glue, and some adhesive remover for when you need to remove them.

LOL sounds like something i would do...Weld a bead on the end of the pipes and t bolts are a god sent....


P.s. congrads on the times...

Davis
DemonStreetMachine
July 21st, 2006, 02:53 PM
I agree, have a bead welded on or have an exhaust shop flare the end.

I might be headed to test-n-tune next week because my buddy with a stroked evo and new GT35r is planning on running. Also I might be picking up a mod tomarrow that will get me to low twelves even sooner. :D
Hemicolt
July 21st, 2006, 03:48 PM
I agree, have a bead welded on or have an exhaust shop flare the end.

I might be headed to test-n-tune next week because my buddy with a stroked evo and new GT35r is planning on running. Also I might be picking up a mod tomarrow that will get me to low twelves even sooner. :D


Who's evo or what color and good luck on the next tnt i hope you get low 12's...
Mr. Moose
July 21st, 2006, 05:06 PM
Who's the guy with the 35R Evo?
yokotabrat
July 22nd, 2006, 12:17 AM
Nice time! Nearly identical to my B16g time listed in my sig.
DemonStreetMachine
July 22nd, 2006, 02:20 AM
Its my buddy Taylor's silver evo 8. Hemicolt you know who I am talking about. It should fly if he lets me drive it for a run;)
Hemicolt
July 22nd, 2006, 11:11 PM
HEHE i know i just haven't talked to taylor in forever....
Mr. Moose
July 23rd, 2006, 06:11 PM
Is the Evo with the 35R coming to T-and-T this week?
DemonStreetMachine
July 25th, 2006, 09:53 AM
No T&T this week but I will get him there on Aug 2nd.