Parting 2G Talon

[milehightalon]

The following is a list of available aftermarket items. There are plenty of stock parts available as well as a caged chassis with a pretty clean body.

Item Price
AEM Rear Big Brake Kit $100
G-Force 5-Point Cam Lock Harnesses $50 each
B&M Short throw Shifter $100
Sparco Mugello Steering Wheel $150
RMDSM Fornt and Rear Sway Bars $200
RRE Front Strut Tower Bar $50
RRE Rear Strut Tower Bar $50
Prothane Bushing Set $75
Pair of Eibach 8" 550lb 2.5" Springs $50
T-sport Rev Lite Sequential Rev Light $75
AEM Wideband Kit (Not the Gauge) $225
Apex Rev Speed Meter $50
MSD DIS II Ignition $250
NX Single Fogger with IC
Sprayer Purge $400
FIC 850cc Injectors $250
Aeromotive Fuel Pressure Regulator $100
6AN Lines, filter, Rail fittings $150
SBR GT 11 Turbo. Polished compressor housing, 90* Outlet $900
SS Turbo oil Feed line with inline filter $50
SS Turbo oil return line $50
Thermal Catback (not flanged) $275
Tial 40mm Wastegate $175
Fluidyne Radiator $250
FAL Double Shrouded Fan $250
EVO 3 Oil Filter Housing $50
Setrab 25 Row Oil Cooler with -8 Lines $125
HKS 272/264 Cams $400
Race Built Cylinder Head
-1G Head
-Stage III portwork
-Cryo Treated
-1mm oversized Ferrea Valves
-Crower valve springs
-Crower Ti retainers $1,000
Damaged Quaife Center Needs $400 repair $300
ARP Head Studs $50
3" Dejon intake. No ports for blow through or Speed Density. 3" Filter included. http://dsm.dejonpowerhouse.com/edit/2-01_CIP-2gQ-3.jpg $50
SSMIC $50
Custom Upper and Lower IC Pipes for SSMIC and HKS SSQ with port for GM IAT $50

[BlueVelocity]

AEM 3.5 BAR MAP Sensor $50

I want it!

GM IAT Sensor $25
Is this brand new? If so, i'll take it as well.


Erron S.
(Making the jump to AEM and Single turbo conversion)

[milehightalon]

I thought of a couple more items I forgot to mention.

3" Dejon intake. No ports for blow through or Speed Density. 3" Filter included. http://dsm.dejonpowerhouse.com/edit/2-01_CIP-2gQ-3.jpg $75

HKS SSQ BOV $150

Crankcase Breather / Catch Can http://roadraceengineering.com/parts/catchcan/smallcatchcan01.jpg $30

SSMIC $50

Custom Upper and Lower IC Pipes for SSMIC and HKS SSQ with port for GM IAT $75

That's it for now.

Justin

[milehightalon]

I dropped the prices on pretty much everything. I updated the original post.

[BlueVelocity]

Tell me more about that turbo, that's one i'm not familiar with.

Erron S.

[XakEp]

I need the cruise control panel off the dash with no broken tabs if you have one.

[milehightalon]

I need the cruise control panel off the dash with no broken tabs if you have one.

Already gone.

[milehightalon]

Tell me more about that turbo, that's one i'm not familiar with.

Erron S.

Here is all the info http://www.slowboyracing.com/more.php?id=30&

I think this is the map, but I'm not positive.

http://www.milehightalon.com/maps/t04s_52.jpg

It's been a while since I looked at it. It was basically the smallest "big" GT series turbo that was available. It was attractive, because it looked like it would be happier at higher PRs than the other larger GT series turbos.

SBR has a pretty bad image right now, but everything except the turbine housing is Garrett.

Justin

[dsm_gsx97]

Justin I almost forgot, but are we still good on the bottle heater and gauge?

[milehightalon]

Justin I almost forgot, but are we still good on the bottle heater and gauge?

What did we agree on? I also have a 3' -4 hose, that allowed me to mount the gauge where I could see it from the driver's seat if I looked over my shoulder.

[dsm_gsx97]

I'm not worried about that...I have one gauge at the solenoid that is in my dash and the other one (yours) I want to put on the bottle. I'll send you an email about what we talked about at Errons (price wise), but I mainly needed the bottle heater and you mentioned the gauge which I wouldn't mind having one for the bottle either. We'll talk on email...

[drcustom]

Any chance you have a transmission?

I'm also looking for AWD swap parts, if you'd have anything available.

[milehightalon]

Any chance you have a transmission?

I'm also looking for AWD swap parts, if you'd have anything available.

I have a 5 speed manual. Never rebuilt. ~80,000 on it, just like the rest of the chassis. Shifts good, never really tested it at really high rpms. Make an offer.

I'm leaving out of town tomorrow for a couple weeks. We can talk a bit more when I get back. Chances are I have what ever you are looking for to do the AWD swap. Gas tank, drive shaft, all half shafts, t-case, tranny, etc. I'll make you a sweet deal on the whole caged chassis and drivetrain.

Justin

[drcustom]

I think we could definitely make something happen. I sent you a PM, let me know if you got it.



I have a 5 speed manual. Never rebuilt. ~80,000 on it, just like the rest of the chassis. Shifts good, never really tested it at really high rpms. Make an offer.

I'm leaving out of town tomorrow for a couple weeks. We can talk a bit more when I get back. Chances are I have what ever you are looking for to do the AWD swap. Gas tank, drive shaft, all half shafts, t-case, tranny, etc. I'll make you a sweet deal on the whole caged chassis and drivetrain.

Justin

[milehightalon]

The following is an updated list of available aftermarket items. There are plenty of stock parts available as well as a caged chassis with a pretty clean body.

Item Price
AEM Rear Big Brake Kit $100
G-Force 5-Point Cam Lock Harnesses $50 each
B&M Short throw Shifter $100
Sparco Mugello Steering Wheel $150
RMDSM Fornt and Rear Sway Bars $200
RRE Front Strut Tower Bar $50
RRE Rear Strut Tower Bar $50
Prothane Bushing Set $75
Pair of Eibach 8" 550lb 2.5" Springs $50
T-sport Rev Lite Sequential Rev Light $75
AEM Wideband Kit (Not the Gauge) $225
Apex Rev Speed Meter $50
MSD DIS II Ignition $250
NX Single Fogger with IC
Sprayer Purge $400
FIC 850cc Injectors $250
Aeromotive Fuel Pressure Regulator $100
6AN Lines, filter, Rail fittings $150
SBR GT 11 Turbo. Polished compressor housing, 90* Outlet $900
SS Turbo oil Feed line with inline filter $50
SS Turbo oil return line $50
Thermal Catback (not flanged) $275
Tial 40mm Wastegate $175
Fluidyne Radiator $250
FAL Double Shrouded Fan $250
HKS 272/264 Cams $400
Race Built Cylinder Head
-1G Head
-Stage III portwork
-Cryo Treated
-1mm oversized Ferrea Valves
-Crower valve springs
-Crower Ti retainers $1,000
Damaged Quaife Center Needs $400 repair $300
ARP Head Studs $50
3" Dejon intake. No ports for blow through or Speed Density. 3" Filter included. http://dsm.dejonpowerhouse.com/edit/2-01_CIP-2gQ-3.jpg $50
SSMIC $50
Custom Upper and Lower IC Pipes for SSMIC and HKS SSQ with port for GM