Thanks to Jacks Transmissions

[mitsunut]

Thanks for the quick service . I recieved my parts earlier than expected and finished assembling my transmission. I hope your business stays going for a long time , you are an asset to the DSM/ Mitsubishi community. Jim Zapp .

[JackM]

Cool, thanks!

Please keep in mind, when assembling the unit, that you have to torque down the end shaft nuts as tight as you can and crush the tabs in on the notched area of the shaft to prevent them from working loose. The most common problem I see from the DIY guys when it comes to trannies is the bolts working their way loose. A little red locktite might not be a bad idea either.

Jack

[mitsunut]

Thanks for the tip.
Jim.