DSMtuned
July 27th, 2006, 11:50 AM
I just found this by chance. I ordered my new update. SWEET!!
-Craig:D
http://www.pocketlogger.com/forum/viewtopic.php?t=437
Posted: Tue Feb 15, 2005 12:44 pm Post subject: Version 2.03b
--------------------------------------------------------------------------------
Version 2.03b has the following changes:
WBo2 support using the unused EGR Temp input:
Currently it is set up for PLX units. If you have another WBo2 unit with a 0-5v output, please post so we can support it!
You need to connect the 0-5v output from the WBo2 device to
Pin 15 on a DSM.
Pin 53 on a 3/s.
Software:
There is a WB02 parameter in the Select Param screen now
There is now a WB Setup screen. Tap the menu button from the main screen and tap "Preferences" then the "WBo2 Setup" button.
If you are connected to the car, it will display the current WB02 reading. There is an offset that you can adjust up and down to make the logger and the PLX display read the same.
Added a "Double Hz" Preference for KeyDiver chip users.
Other things fixed:
Base timing setting is now remembered
Infinite loop when exiting base timing screen using the Home button now fixed
WB Offset remembered
Datalog screen (graph or numbers) is now remembered.
Fixed intermittent fatal error on selecting a log to view.
Fill out the form www.pocketlogger.com/reg to get it.
-Craig:D
http://www.pocketlogger.com/forum/viewtopic.php?t=437
Posted: Tue Feb 15, 2005 12:44 pm Post subject: Version 2.03b
--------------------------------------------------------------------------------
Version 2.03b has the following changes:
WBo2 support using the unused EGR Temp input:
Currently it is set up for PLX units. If you have another WBo2 unit with a 0-5v output, please post so we can support it!
You need to connect the 0-5v output from the WBo2 device to
Pin 15 on a DSM.
Pin 53 on a 3/s.
Software:
There is a WB02 parameter in the Select Param screen now
There is now a WB Setup screen. Tap the menu button from the main screen and tap "Preferences" then the "WBo2 Setup" button.
If you are connected to the car, it will display the current WB02 reading. There is an offset that you can adjust up and down to make the logger and the PLX display read the same.
Added a "Double Hz" Preference for KeyDiver chip users.
Other things fixed:
Base timing setting is now remembered
Infinite loop when exiting base timing screen using the Home button now fixed
WB Offset remembered
Datalog screen (graph or numbers) is now remembered.
Fixed intermittent fatal error on selecting a log to view.
Fill out the form www.pocketlogger.com/reg to get it.