rlarsen
October 15th, 2006, 10:30 PM
Okay folks, here's the deal, I've got a TON of stuff laying around my garage, and it's time for it to go. Whatever's not gone within a week or two is going in the dumpster (unless it's small and relatively valuable). First come, first served, offer me whatever you think it's worth (even if that's free).
A few of these things may actually belong to local DSMer's, but have probably been sitting in my garage for more than 2 years and I no longer remember who they belong to. If you recognize something, let me know and you can have it back (or I'll toss it for you).
Here goes:
1G C/D Manual cams
1G K&N
1G unmolested aircan
1G (1992) Talon taillights (great shape)
1G TPS
2G TPS
1G A/D cams
Kit for making your own urethane motor mounts
2G 'leather' shifter boot - great shape
2G factory OEM plastic splash guards, these are actually mud guards that attach to the car, not the underneath panels
2.0L cam gears
2G spark plug wire cover (covers middle of valve cover)
99 AWD ECU
Chilton's for 90-98 Eclipse
2G Throttle body (no sensors)
2G Shifter assembly
2G Fuel pump and assorted FP related bits
Multiple FP, EGR, etc. solenoids
2G EGT valve
Tial BOV springs (2 different, not sure which ones)
Turbonetics 90deg. aluminum elbow, 2" (not sure where this came from)
90 oil cooler line, new in bag, PN: MB033658
Greddy flanged upper IC pipe (aluminum, made for short routing)
1G long harness CAS
Starter
Starter harness (1G maybe?)
Good main bearings from 2.4L Hyundai motor (brand new, factory fresh motor was torn down to do a 2.4L 6-bolt build)
Good pistons/rods from same motor.
Thanks.
Ryan
A few of these things may actually belong to local DSMer's, but have probably been sitting in my garage for more than 2 years and I no longer remember who they belong to. If you recognize something, let me know and you can have it back (or I'll toss it for you).
Here goes:
1G C/D Manual cams
1G K&N
1G unmolested aircan
1G (1992) Talon taillights (great shape)
1G TPS
2G TPS
1G A/D cams
Kit for making your own urethane motor mounts
2G 'leather' shifter boot - great shape
2G factory OEM plastic splash guards, these are actually mud guards that attach to the car, not the underneath panels
2.0L cam gears
2G spark plug wire cover (covers middle of valve cover)
99 AWD ECU
Chilton's for 90-98 Eclipse
2G Throttle body (no sensors)
2G Shifter assembly
2G Fuel pump and assorted FP related bits
Multiple FP, EGR, etc. solenoids
2G EGT valve
Tial BOV springs (2 different, not sure which ones)
Turbonetics 90deg. aluminum elbow, 2" (not sure where this came from)
90 oil cooler line, new in bag, PN: MB033658
Greddy flanged upper IC pipe (aluminum, made for short routing)
1G long harness CAS
Starter
Starter harness (1G maybe?)
Good main bearings from 2.4L Hyundai motor (brand new, factory fresh motor was torn down to do a 2.4L 6-bolt build)
Good pistons/rods from same motor.
Thanks.
Ryan